Bodpave™ 85 grass reinforcement paving grids are a modular cellular porous grass paver manufactured from 100% recycled HDPE plastic. Bodpave™85 porous grass pavers / paving grids are a strong interlocking grid system for grass reinforcement, ground stabilization or gravel retention for regularly trafficked areas (pedestrian and vehicles) including overflow grass parking lots and fire lanes. Bodpave™85 permeable pavers can be installed with either a grass or gravel filled surface depending on the application required and are available in black (green and natural are available on request). Manufactured from UV Stabilized 100% recycled HDPE, TYPAR’s porous paving grids are strong, chemically inert & non-toxic. Bodpave™85 plastic paving grids provide a durable, safe and eco-friendly surface for trafficked areas.
APPLICATIONS
- Parking Lots (Grass or Gravel) & Overflow Parking
- Overflow grass car & bus parking lots
- Grass parking areas
- Fire Truck Access routes / Fire Lanes
- Helipads / Helicopter landing pads
- Grassed light aircraft / airplane transport areas / taxiways
- Handicap access routes
- Golf cart paths
- Emergency access roads
- Residential access and parking spaces
- Grass Driveway and grass shoulders
BodPave™ 85 permeable pavers are a cost effective solution to worn & rutted grassed areas, displaced gravel and for source control of surface water run-off in a LID / NPDES specification
BENEFITS
- BodPave™ 85 grass pavers have a load bearing capacity up to 367tons/yd² (400t/m²)
- Manufactured from 100% recycled polymer
- Pavers filled with grass or gravel allow free water drainage into the natural sub-grade
- BodPave™ 85 paving is the solution for retaining gravel or protecting grass parking areas
- BodPave™ 85 grass pave / gravel pave allow a natural, environmentally friendly & free draining grass or contained gravel surface pavement
- Pervious load bearing surface
- Porous paving helps reduce stormwater run off and recharges groundwater supplies
- Manufactured in accordance with LID & NPDES guidelines for water management
FEATURES
The unique design of BodPave™85 permeable pavers resists lateral movement, improves traction and allows expansion & contraction while promoting optimum grass growth, root protection and surface stabilization. The open cell structure provides high surface water infiltration and is suitable for source control within a LID & NPDES profile for storm water management.
- Open cell structure promotes optimum grass growth
- Integral ground spikes resist deformation & lateral movement
- Integral interlocking ‘snap-fit’ connections
- Castellations aid lateral grass growth and increase traction
- Cells contain water retention cups to optimize root growth
- Pavers can be offset by 1 cell increments for curves / obstructions
BodPave™ permeable paving grids should be installed onto a well prepared, free draining, firm and relatively level sub-base using either TYPAR’s ‘reduced-dig system’ or by employing a full sub-base construction incorporating a geogrid reinforcement layer. The plastic paving grids connect together and are filled with either a sand:soil rootzone and seeded or turfed for a grass surface, or filled with an angular aggregate for a gravel surface as determined by the application. Construction profiles for each application will be determined by specific site conditions & load bearing criteria. Detailed design literature and technical support are available to download on the left of this page. Please note that for all BodPave™85 grass paver / gravel paver installations, we strongly recommend that all areas have sufficient drainage prior to the installation. Failure to ensure this may result in the product not performing as intended.
